LUCASMILHAUPT FOS-FLO 0% Solder .125"x.050"x20" 28 RodS 95000

Fos Flo® (Silvaloy® 0)

An economical, very fluid medium temperature filler metal for use with copper, brass and bronze. Withstands moderate vibration. Fast Flow.

Fos-Flo is a copper-phosphorus alloy used for brazing copper-copper or copper to copper alloys. It is commonly used for HVAC applications where a more economical or free flowing alloy is required, though its ductility is lower than the silver bearing copper-phosphorus alloys and therefore should not be used where critical impact or vibration stresses are encountered in service. Where improved ductility is required, Sil-Fos 15 is recommended.

Details:

• Brazing Alloy
• Filler Metal 92.8 Percent Copper/7.2 Percent Phosphorous
• Diameter 0.125 Inch
• Melting Temperature 1310 Deg F
• Metal Used On Copper, Brass, Bronze
• Packaging Type Carton
• Size 20 Inch Length x 0.05 Inch Thickness
• Color Copper
• OEM Form Type Strip
• Flow Point 1460 Deg F (Liquids)
• Temperature Rating 1460 to 1560 Deg F (Brazing)
• Specific Gravity 7.91
• Density 0.286 Pound per Cubic Inch
• Electrical Conductivity 7.5
• Electrical Resistivity 23.2 Micro Ohm-Centimeter
• Application HVAC/Refrigeration, Air Conditioner Coil, Evaporator Coil
• Applicable Standard ANSI Z49.1
• Fos-Flo is a Low Cost Brazing Filler Metal Suitable for Joining Copper to Copper and Copper to Copper Alloys Where Critical Impact or Vibration Stresses are Not Encountered in Service
• This Alloy is Extremely Fluid When Heated Rapidly to its Flow Point and will Penetrate Joints with Very Little Clearance
• Made in USA